Alnico Magnets
-
Payment
-
Origin
China Mainland
-
Minimum Order
15
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Cast Alnico 5 is the most commonly used of all the cast Alnico magnets. This material is used extensively in rotating machinery, meters, instruments, sensing devices, and holding applications, to name a few.
Alnico is hard and brittle. cannot be Machined or drilled. therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish grinded to close tolerances.
Alnico has a low coercive force, and is easily demagnetized if not handled with care. For optimum performance of Alnico 5, the magnetic length should be approximately 5 times the pole diameter or equivalent diameter. For example, a 0.250" diameter magnet should be about 1.00" long.
Because of its higher coercivity, Alnico 8 may be used in shorter lengths and in disc shapes
Alnico magnet is our recommended product. We,SENS Magnetic Products, Inc is an Alnico magnet and SmCo permanent magnet manufacturer in Hangzhou ,China. We supply first-class permanent magnetic products.
- Round Magnetic Base2 50 Pieces / (Min. Order)
- Round Magnetic Base1 50 Pieces / (Min. Order)
- Magnetic Filter 50 Pieces / (Min. Order)
- Small Magnets 15 Pieces / (Min. Order)
- Bonded NdFeB 15 Pieces / (Min. Order)
- FeCrCo & Crovac 15 Pieces / (Min. Order)
- Aluminum Nickel Cobalt 15 Pieces / (Min. Order)
- Alcomax3 15 Pieces / (Min. Order)
- Magnetic Lifters 15 Pieces / (Min. Order)
- Samarium Cobalt Magnete 15 Pieces / (Min. Order)
- Magnetic Chuck 15 Pieces / (Min. Order)
- Neo Magnets 15 Pieces / (Min. Order)
- Rare Earth Magnet 15 Pieces / (Min. Order)
- Red Paint Pot 15 Pieces / (Min. Order)
- CoFeVCr 15 Pieces / (Min. Order)
- FeCrCoMo 15 Pieces / (Min. Order)
- Sm2Co17 15 Pieces / (Min. Order)
- SmCo5 15 Pieces / (Min. Order)
- Sintered SmCo 15 Pieces / (Min. Order)
- Bonded SmCo 15 Pieces / (Min. Order)